DROP TEST TRAINING MANIKIN

As the name suggests, this manikin is the perfect choice for testing fall arrest equipment and harnesses. It is has a more rigid trunk to reduce slumping when suspended in a harness and will allow you to properly assess the safety of your fall arrest equipment. 

T

SPECIAL MATERIALS:

Constructed from the same flame retardant material used in Police ballistic/stab vests, offering 4x the strength and abrasion resistance of 16oz canvas or P.V.C. (Conforms to OEKO-TEX® Standard 100, BS EN ISO 12947-2 & 14116: 2008). High density polypropylene webbing (25mm rated to 207 Kg, 50mm rated to 440Kg).

FEATURES & BENEFITS

• Similar in construction to the Duty Range manikins but utilises closed-cell foam to the trunk to provide greater rigidity and reduce 'slumping' when using a rescue harness.
• Anatomically correct weight distribution gives the 'feel' of an unconscious person - perfect for pole top or tower rescues.
• Realistic sizes and weight 100kg! - will demonstrate the difficulties of dealing with an adult unconscious casualty
• Strong Polypropylene webbing loop to the back allows the manikin to be easily hauled into position prior to training.
• Strong enough to be dropped from 2 or 3 storeys with no damage - these manikins are tough!
• The Polyester is waterproof, making it suitable for training in wet or dry conditions as it can be easily cleaned and dried.
• Soft body joints eliminate the risk of pinch welts and bruising, a common injury when using plastic bodied manikins.
• Protective consumables including, coveralls and boots, greatly extended the life of the manikin and help save you costs.

NOT SUITED FOR:

• Use in temperatures above 100°C or flash-over scenarios – See our Fire House manikin.
• Use in water – See our Water Rescue range.

OPTIONAL EXTRAS:

• Face mask and wig for a more human-like appearance.

EXTENSIVELY USED BY:

• Manufacturers of Fall Arrest Equipment.

Drop Test Manikin Data Sheet